That will do it every time...

I forgot to plug in the sync cable once, at the top of the tower.

Mike Bushard, Jr
Wisper Wireless Solutions, LLC
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Wednesday, February 22, 2006 8:49 PM
To: WISPA General List
Subject: Re: [WISPA] WAS.....HELP M2 Yagi won't.......Problem Fixed

Some IDIOT that was in my enclosure bumped the power supply and 
unplugged the AP.  The idiot was me.

Brian Rohrbacher wrote:

> I am trying to get an install done tonight but can only get -112 dbm 
> on a Canopy SM with a M2 yagi.  I hung the Canopy yesterday (my first 
> one) and did an install.  I did one install earlier today with the 13 
> dbi yagi from CTI, so I know I'm not doing something on the radio 
> wrong.  Anyway, these antennas have to be assambled and must be I put 
> it together wrong.  Well, as soon as an answer I'll go finish the 
> install.  The install is 5 miles LOS.  It didn't work so I came home 
> and assembled another Canopy radio and antenna and this one didn't 
> work either.  My house is 1/2 mile LOS, so it's not a low signal 
> issue.  Anyway, it must be these M2 Yagis.
>
> Give me a call if you want.  269 838 8338
>
>
> Brian


-- 
Brian Rohrbacher
Reliable Internet, LLC
www.reliableinter.net
Cell 269-838-8338

"Caught up in the Air" 1 Thess. 4:17

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to