I would check the terminations and maybe re-terminate them, especially
if you have verified with a new cable that it works ok.

-Hal


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Wednesday, September 13, 2006 10:10 AM
To: WISPA General List
Subject: Re: [WISPA] MT power supplies

Yes, ethernet is shielded.  The good stuff.  It's like almost 1/2 inch
cat5.

The tower has pagers, lots of trango, few backhauls, canopy 900, and 
some more I believe.  The only thing up with me is some trango, and they

have no problem.  I am pointing at a bad cable.

Brian

Harold Bledsoe wrote:

>The 800 to 1300mA consumption is at 3.3V.  The 700mA from the PS is at
>48V so there is probably plenty of power going to it.
>
>Is the CAT5 shielded?  What else is on the tower?
>
>-Hal
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>Behalf Of Mark McElvy
>Sent: Wednesday, September 13, 2006 8:20 AM
>To: WISPA General List
>Subject: RE: [WISPA] MT power supplies
>
>I am surprised no one has mentioned this. I looked up power consumption
>on the SR5 and it shows 800 to 1300 mA each. You state your power
supply
>is 700mA. I did not look up power consumption for the RB532 but I would
>think you would need at least a 3A supply. 
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>Behalf Of Brian Rohrbacher
>Sent: Tuesday, September 12, 2006 11:51 AM
>To: WISPA General List
>Subject: Re: [WISPA] MT power supplies
>
>So, does anyone know if it looks like I would be fine on the power side

>of things?
>I have tweaked the ethernet port settings for no gain.
>
>Next step is to get climbing 280ft to replace board, but I'd like to 
>confirm power first.
>
>Brian
>
>Brian Rohrbacher wrote:
>
>  
>
>>I have a RB 532 on 300 foot of cat 5 with 2 sr5.
>>I'm using poe 48v .700a power supply.
>>I'm seeing weirdness.
>>
>>Do I have enough "juice"
>>
>>Brian
>>    
>>
>
>  
>
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to