Travis,

Do any of these APC models, comes WITHOUT internal batteries, so you don't have to worry about matching up the battery types, and just pick your preferred external ones?

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


----- Original Message ----- From: "Travis Johnson" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Wednesday, November 15, 2006 1:59 PM
Subject: Re: [WISPA] External battery on UPS


Hi,

Buy the sealed AGM style batteries (same style used in UPS systems). They don't have any vents and are completely sealed... and even if the case breaks, nothing leaks out of them. They are more money, but well worth it.

Travis
Microserv

Brian Rohrbacher wrote:
How big of a room would be needed for having regular batteries? I don't need an explosion. My NOC is an 8x8 "storage shed" which is pretty well air tight. How dangerous is a couple of regular deep cells in there?

Brian

Gino A. Villarini wrote:

Did you check the voltage on the battery bank that came with the APC unit? I do know that the APC 750 Smart UPS have a Battery bank of 24 vdc, so if this
is the case of your unit, you'll need 2 batts in series

Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel  787.273.4143   fax   787.273.4145

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Nash - Lists
Sent: Wednesday, November 15, 2006 3:51 AM
To: WISPA General List
Subject: Re: [WISPA] External battery on UPS

APC SUNET700.  1 battery.

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
----- Original Message ----- From: "Gino A. Villarini" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <wireless@wispa.org>
Sent: Tuesday, November 14, 2006 9:20 PM
Subject: RE: [WISPA] External battery on UPS



What apc model ? how many batts are you using ?

Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel  787.273.4143   fax   787.273.4145

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Nash - Lists
Sent: Wednesday, November 15, 2006 12:43 AM
To: WISPA General List
Subject: [WISPA] External battery on UPS

I believe I remember some discussion on this list on connecting an external
battery to an APC UPS.  I'm in the middle of doing it right now and am
having problems.  The UPS just beep continuously with the 'bad battery'
light on.  I'm using a Lifeline deep cycle battery.  Any ideas?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/






--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to