I use the shielded connectors from Cables To Go.. They seem to work
well enough but they are definitely a PITA. I use actual shielded
RJ-45 or shielded Keystones and even Shielded Patch Panels that are
then grounded outside via copper ground rod.
In my application it is grounded via the Patch Panel however if it
were just going from a CPE/AP to a switch/computer i don't think it
would be properly grounded?
Anyhow just some food for thought.
Here are the links:
http://www.cablestogo.com/product.asp?cat%5fid=419&sku=27579
Demonstration of how to terminate, notice the "loading bar" diagram at
the bottom.
http://www.vpi.us/installation/assemble-cat6shld.html
Quoting Mike Hammett <[EMAIL PROTECTED]>:
argh, not gel filled! ;-)
I was looking at needing the shielded cable because of an FM station
not far away. I haven't been able to squelch it yet at a customer 1/2
mile away.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message ----- From: "Smith, Rick" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Tuesday, August 14, 2007 2:49 PM
Subject: RE: [WISPA] RJ-45 and crimpers
If this is going in that conduit, use gel filled, not shielded.
I'm in love with EZ-RJ45's. They're expensive - $.55 / connector or so,
but MAN do they save time and you KNOW it's done in the right pattern.
http://www.telephoneparts.com/product/EZRJ45/EZ-RJ45+Crimping+System
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, August 14, 2007 3:47 PM
To: WISPA List
Subject: [WISPA] RJ-45 and crimpers
The RJ-45 male connectors and crimpers I use are a PITA sometimes. What
are some nice connectors and crimpers to use? The female ends I use are
really easy to put in the right order (and stay there), they don't have
to be the exact length, etc.
That said, I'm looking at possibly needing to install some shielded
cable. I'd imagine they'd need a connector made for shielded cable.
Suggestions on this route are appreciated as well.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
