The stuff we use to go up the tower is either a heavier gage copper or a
thicker insulation on the conductor. Maybe both.
I use the ez's there always. It's easier to terminate and I'm that much
more comfortable knowing I went the extra step to have no problems or
issues.
On customer premises stuff, I use the typical connector and don't have
any problems.
I also buy thousands per year and I like thouands times .10 than .55
George
Mike Hammett wrote:
I've done hundreds of crimps with the cheapos, but I am lazy and time is
money. ;-)
Regular indoor cable and the first few reels of outdoor cable I used
were all pretty easy, but as I've started to get different kinds of
cable in, some are more difficult to work with than others.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message ----- From: "George Rogato" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Tuesday, August 14, 2007 4:06 PM
Subject: Re: [WISPA] RJ-45 and crimpers
I know those EZ's are easy, but they are expensive.
Why don't you just learn to use the cheap ones and get it right. Why
ay more if you don't have to?
George
Mike Hammett wrote:
The RJ-45 male connectors and crimpers I use are a PITA sometimes.
What are some nice connectors and crimpers to use? The female ends I
use are really easy to put in the right order (and stay there), they
don't have to be the exact length, etc.
That said, I'm looking at possibly needing to install some shielded
cable. I'd imagine they'd need a connector made for shielded cable.
Suggestions on this route are appreciated as well.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
George Rogato
Welcome to WISPA
www.wispa.org
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/