Go to radio shack or a local electronics store and get a 24 volt dc power supply. That should make up for the voltage loss in the long cable run. --- [EMAIL PROTECTED] wrote:
> We have a connectorized tranzeo AP set up to feed a > couple clients. > We've gone through a couple AP radios that have > exhibited the same > symptoms- They power up fine, clients connect up > fine, SNR looks good. > After about 10 mins, the AP stops responding. > It's still powered > up, but you cant get into it on the ethernet side. > Rebooting doesnt > help. We've swapped everything out. The cable run > tests good and is > @ 250' long. We are using the 18v power supply that > came with the > unit. Could the brick not have enough juice to power > the unit at that > distance? Any suggestions much appreciated. > > Thanks > Chris > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet > Messaging Program. > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/