The board works at 18v and there's only one wireless card. At 50ft or even 500ft you're not losing 1v.
I'm betting you have a 24v poe? On 1/20/09, Dennis Burgess - LinkTechs <[email protected]> wrote: > Remember the 411AH and the 433AH are EXACTLY the same with two > exceptions, less Ethernet and wireless ports and micro-sd slot. > > > * ----------------------------------------------------------- > Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer > WISPA Board Member - wispa.org <http://www.wispa.org/> > Link Technologies, Inc -- Mikrotik & WISP Support Services > WISPA Vendor Member* > *Office*: 314-735-0270 *Website*: http://www.linktechs.net > <http://www.linktechs.net/> > */LIVE On-Line Mikrotik Training/* > <http://www.linktechs.net/onlinetraining.asp> > > The information transmitted (including attachments) is covered by the > Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only > for the person(s) or entity/entities to which > it is addressed and may contain confidential and/or privileged material. Any > review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than > the intended recipient(s) is prohibited, If you > received this in error, please contact the sender and delete the material > from any computer. > > > > > > Josh Luthman wrote: >> We knew what you meant because the 433 has three ports and 411 has one. >> >> I do suggest putting a 433ah up there if you plan to have some good >> usage. Saving 50 dollars isn't worth playing with the board upgrade >> game for the capacity it provides. >> >> If the 433ah does work then your line is probably good, does usage >> change? If so the 100m/full change would be my suggestion too. >> >> Note the 4xx boards are very similar hardware (only changes are >> memory, ports and some models have bigger CPUs). >> >> On 1/20/09, Forbes Mercy <[email protected]> wrote: >> >>> Oops let me correct myself I've been saying 433a, it's actually a 411a. >>> The board that is working is the 433ah. >>> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] On >>> Behalf Of Leon D. Zetekoff, NCE >>> Sent: Tuesday, January 20, 2009 4:21 PM >>> To: WISPA General List >>> Subject: Re: [WISPA] Microtik Remote Weirdness >>> >>> * Forbes Mercy wrote, On 1/20/2009 7:00 PM: >>> >>>> <snip> >>>> >>>> Took a back-up 433AH board up and used the same radio card, worked >>>> >>> like >>> >>>> a charm for both our access and customer throughput. We didn't want >>>> >>> to >>> >>>> waste a three port/LAN board so ordered a 433a single port board. >>>> >>> Once >>> >>>> it arrived we logged into it by MAC in the office with no problem, >>>> programmed it and sent it up to the tower. Once on the tower >>>> >>> customers >>> >>>> associated just fine but once again we couldn't access the management >>>> side. We saw the MAC and the identity for it but we couldn't ping >>>> >>> that >>> >>>> IP (yes, the 433AH radio was unplugged) and trying to load by MAC >>>> >>> would >>> >>>> start the RouterOS download but at various places it would crash. >>>> >>>> Moved the 433A down to the hut and a laptop easily logged into it, >>>> >>> even >>> >>>> when plugged into the switch, but we still couldn't log into it from >>>> remote, although the laptop on scene was going through the same switch >>>> and by MAC just like we were trying, sigh. OK we put the 433AH back >>>> >>> in >>> >>>> service and again everything worked great. I'm stumped, we isolated >>>> >>> the >>> >>>> switch, Cat 5, and IP Address but those two single cards won't allow >>>> >>> us >>> >>>> to log in over using Winbox either by IP or by MAC while it allows it >>>> locally. *banging head against the wall. Any ideas? >>>> >>> Hi Forbes.... >>> >>> A few questions/comments: >>> : >>> How long is the ethernet run? >>> We had a MTK client radio on an RB113 go irratic at times. >>> You can't upload into the MTK when using Winbox with the MAC address, >>> only IPs. >>> How about duplex/speed are they both matched? You might want to crank it >>> >>> to 10M/FULL and see if that helps. >>> >>> Leon >>> >>> >>> >>> >>> ------------------------------------------------------------------------ >>> -------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> ------------------------------------------------------------------------ >>> -------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> No virus found in this incoming message. >>> Checked by AVG - http://www.avg.com >>> Version: 8.0.176 / Virus Database: 270.10.10/1905 - Release Date: >>> 1/20/2009 2:34 PM >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
