Hi Forbes... YOu can also look at the connectors on the cable you might want to try and put new ones on there. Also, did you try a different POE injector at the tower? Let us know what you come up with.
Leon * Forbes Mercy wrote, On 1/20/2009 7:33 PM: > Hi Forbes.... > > A few questions/comments: > : > How long is the ethernet run? > > About 50 feet > > We had a MTK client radio on an RB113 go irratic at times. > > We brought the 133 back into the office and had no problem accessing it > with short length Cat 5 and the wireless worked great, same for the new > 433A board. So this leaves us with the 433AH and one card working at the > 50 foot length radio mount but not the 133 or 433a which work perfectly > in the office. > > You can't upload into the MTK when using Winbox with the MAC address, > only IPs. > How about duplex/speed are they both matched? You might want to crank it > to 10M/FULL and see if that helps. > > We can try this. > > Forbes > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Leon D. Zetekoff, NCE > Sent: Tuesday, January 20, 2009 4:21 PM > To: WISPA General List > Subject: Re: [WISPA] Microtik Remote Weirdness > > * Forbes Mercy wrote, On 1/20/2009 7:00 PM: > >> <snip> >> >> Took a back-up 433AH board up and used the same radio card, worked >> > like > >> a charm for both our access and customer throughput. We didn't want >> > to > >> waste a three port/LAN board so ordered a 433a single port board. >> > Once > >> it arrived we logged into it by MAC in the office with no problem, >> programmed it and sent it up to the tower. Once on the tower >> > customers > >> associated just fine but once again we couldn't access the management >> side. We saw the MAC and the identity for it but we couldn't ping >> > that > >> IP (yes, the 433AH radio was unplugged) and trying to load by MAC >> > would > >> start the RouterOS download but at various places it would crash. >> >> Moved the 433A down to the hut and a laptop easily logged into it, >> > even > >> when plugged into the switch, but we still couldn't log into it from >> remote, although the laptop on scene was going through the same switch >> and by MAC just like we were trying, sigh. OK we put the 433AH back >> > in > >> service and again everything worked great. I'm stumped, we isolated >> > the > >> switch, Cat 5, and IP Address but those two single cards won't allow >> > us > >> to log in over using Winbox either by IP or by MAC while it allows it >> locally. *banging head against the wall. Any ideas? >> > Hi Forbes.... > > A few questions/comments: > : > How long is the ethernet run? > We had a MTK client radio on an RB113 go irratic at times. > You can't upload into the MTK when using Winbox with the MAC address, > only IPs. > How about duplex/speed are they both matched? You might want to crank it > > to 10M/FULL and see if that helps. > > Leon > > > > > ------------------------------------------------------------------------ > -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ > -------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.176 / Virus Database: 270.10.10/1905 - Release Date: > 1/20/2009 2:34 PM > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
