Actually they did produce some 2.4GHz feeds but as far as I know they
decided not to market them but Pac sourced their solid dishes from China and
I know others that sold the same dish but the feeds many times where
different and they brought out their own feed for the dish. So it might be
same dish but branded different and sold with a 2.4GHz feed as I know there
at least used to be others selling 2ft solid dishes with 2.4GHz feeds. But I
know few that was interested in paying that much for a solid dish to use as
a 2.4GHz backhaul or use a solid dish at a CPE. Most people if they used
2.4GHz for backhauling they where/are to "cheap" to use a solid dish or 5GHz
radios so they all seem to go with cheap grid dishes or panels.

/ Eje

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Josh Luthman
Sent: Wednesday, October 21, 2009 10:10 AM
To: WISPA General List
Subject: Re: [WISPA] Identifying 2ft dish frequency

Assuming they're Pac (not sure how that was determined)

You know they are 2.4 or 5Ghz

Eje just said: If these are Pacific Wireless dishes then they are 5GHz
assuming these are
solid dishes since Pac never produced a 2.4GHz feedhorn for their solid
dishes at least during the 6+ years we been one of their distributors.

Obviously it's 5GHz!

Polarity is normally done with an arrow sticker on the base of the
feedhorn.  Of course if it's been out in the weather it's long gone.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

"When you have eliminated the impossible, that which remains, however
improbable, must be the truth."
--- Sir Arthur Conan Doyle


On Wed, Oct 21, 2009 at 11:03 AM, Brad Belton <[email protected]> wrote:

> BTW Mark, if you determine they are PacWireless antennas I'd just punt
them
> on EBay and replace them with RadioWaves or Gabriel 2' antennas.  In the
> long run you'll be a lot happier.  Just my opinion...
>
> Best,
>
>
> Brad
>
>
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Brad Belton
> Sent: Wednesday, October 21, 2009 10:01 AM
> To: 'WISPA General List'
> Subject: Re: [WISPA] Identifying 2ft dish frequency
>
> Ok, just checking.  Good cover...<grin>
>
> Best,
>
>
> Brad
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Josh Luthman
> Sent: Wednesday, October 21, 2009 9:56 AM
> To: WISPA General List
> Subject: Re: [WISPA] Identifying 2ft dish frequency
>
> The feedhorn specifically.  Maybe the length will help you too.  I know
> with
> higher gain the 5GHz grids are noticeably longer.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> "When you have eliminated the impossible, that which remains, however
> improbable, must be the truth."
> --- Sir Arthur Conan Doyle
>
>
> On Wed, Oct 21, 2009 at 10:48 AM, Brad Belton <[email protected]> wrote:
>
> > Hmmm, pretty sure a 2' dish is a 2' dish regardless of frequency...or
are
> > you speaking of the diameter of the feed?
> >
> > Best,
> >
> >
> > Brad
> >
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]] On
> > Behalf Of Josh Luthman
> > Sent: Wednesday, October 21, 2009 9:40 AM
> > To: WISPA General List
> > Subject: Re: [WISPA] Identifying 2ft dish frequency
> >
> > Can you measure diameter and compare it with the 2.4 and 5.8 GHz dishes?
> > Never thought about it but they would have to be different sizes.
> >
> > Josh Luthman
> > Office: 937-552-2340
> > Direct: 937-552-2343
> > 1100 Wayne St
> > Suite 1337
> > Troy, OH 45373
> >
> > "When you have eliminated the impossible, that which remains, however
> > improbable, must be the truth."
> > --- Sir Arthur Conan Doyle
> >
> >
> > On Wed, Oct 21, 2009 at 10:34 AM, Mark McElvy <[email protected]>
> wrote:
> >
> > > I happen to know they are either 5.8 or 2.4 as this was the only
> > > equipment I have found of theirs, they left it all when they went out
> of
> > > business.
> > >
> > > Mark McElvy
> > > AccuBak Data Systems, Inc.
> > > 573.729.9200 - Office
> > > 573.729.9203 - Fax
> > > 573.247.9980 - Mobile
> > > http://www.accubak.com/
> > > http://www.accubak.net/
> > > Nationwide Internet Access
> > > Accurate backups for your critical data!
> > >
> > >
> > > -----Original Message-----
> > > From: [email protected] [mailto:[email protected]]
> On
> > > Behalf Of ccrum
> > > Sent: Wednesday, October 21, 2009 9:29 AM
> > > To: WISPA General List
> > > Subject: Re: [WISPA] Identifying 2ft dish frequency
> > >
> > > Got a spectrum analyzer and a frequency generator? Or a good network
> > > analyzer will do, but most people don't have one laying around. The
> > > feeds could literally be anything. You might be better off just
calling
> > > the MFG of the dish and buying new feeds in the range you want unless
> > > you you have a few hours of extra time on your hands.
> > >
> > > Cameron
> > >
> > > Mark McElvy wrote:
> > > > I have 4 two ft dishes that where pulled down when the previous wisp
> > > > went out of business. There are no markings on them and I need to
> > > > determine frequency and polarity.
> > > >
> > > >
> > > >
> > > > Mark McElvy
> > > > AccuBak Data Systems, Inc.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> ------------------------------------------------------------------------
> > > --------
> > > > WISPA Wants You! Join today!
> > > > http://signup.wispa.org/
> > > >
> > >
> ------------------------------------------------------------------------
> > > --------
> > > >
> > > > WISPA Wireless List: [email protected]
> > > >
> > > > Subscribe/Unsubscribe:
> > > > http://lists.wispa.org/mailman/listinfo/wireless
> > > >
> > > > Archives: http://lists.wispa.org/pipermail/wireless/
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > > --------
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
> ------------------------------------------------------------------------
> > > --------
> > >
> > > WISPA Wireless List: [email protected]
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> > >
> > >
> > >
> >
> >
>
>
----------------------------------------------------------------------------
> > ----
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
> > >
> >
> >
>
>
----------------------------------------------------------------------------
> > ----
> > >
> > > WISPA Wireless List: [email protected]
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> >
> >
> >
> >
>
>
----------------------------------------------------------------------------
> > ----
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> >
>
>
----------------------------------------------------------------------------
> > ----
> >
> > WISPA Wireless List: [email protected]
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >
> >
> >
> >
>
>
----------------------------------------------------------------------------
> ----
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> >
>
>
----------------------------------------------------------------------------
> ----
> >
> > WISPA Wireless List: [email protected]
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
>
>
>
>
----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
----------------------------------------------------------------------------
> ----
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
>
>
----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
----------------------------------------------------------------------------
> ----
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
>
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
----------------------------------------------------------------------------
----
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to