I've been doing Auto Ack since beta 8 came out and it seems to be setting it just right but I use UBNT for the AP as well. Before that I was setting them a little more than the center of the CPEs average distance with no issues.
However, with the UBNT on both sides we can also set the AirMax priority so that the clients further out have lower priority thus the closer ones won't suffer. With the setting of the two it's been smooth. Bob- -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Data Technology Sent: Friday, May 14, 2010 4:54 PM To: WISPA General List Subject: [WISPA] ack settings I have MT for access points and mostly UBNT for client units. Just wondering about the proper way to set the ack on the CPE. I have always just set it for a little further than the customer on the UBNT side and left the MT side to dynamic. This was set differently for each customer. One might be set at 1 mile and one might be set at 5 miles. I read something the other day that said the ack should be set at the furtherest customer plus about 10%. I read this to mean that all customers should be set to the furtherest distance, is this correct? Also searching came up with the fact that the auto ack setting on UBNT is more of a problem that a help. Just looking for suggestions and input on how everyone is setting the client units. And do I leave the access point set to dynamic or should I set it statically as well? Thanks ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
