I see. I'm still in the legacy world. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Fri, May 14, 2010 at 6:38 PM, Stuart Pierce <spie...@avolve.net> wrote: > > Airmax is up to 5.2.beta8, legacy is up to 3.5.xxxrc something. > > ---------- Original Message ---------------------------------- > From: Josh Luthman <j...@imaginenetworksllc.com> > Reply-To: WISPA General List <wireless@wispa.org> > Date: Fri, 14 May 2010 17:30:39 -0400 > >>What is beta 8? >> >>I've never changed the ack timeouts. I've always used dynamic (MT APs >>and NS2 CPEs). >> >>Josh Luthman >>Office: 937-552-2340 >>Direct: 937-552-2343 >>1100 Wayne St >>Suite 1337 >>Troy, OH 45373 >> >>“Success is not final, failure is not fatal: it is the courage to >>continue that counts.” >>--- Winston Churchill >> >> >> >>On Fri, May 14, 2010 at 5:12 PM, Robert West <robert.w...@just-micro.com> >>wrote: >>> I've been doing Auto Ack since beta 8 came out and it seems to be setting it >>> just right but I use UBNT for the AP as well. Before that I was setting >>> them a little more than the center of the CPEs average distance with no >>> issues. >>> >>> However, with the UBNT on both sides we can also set the AirMax priority so >>> that the clients further out have lower priority thus the closer ones won't >>> suffer. With the setting of the two it's been smooth. >>> >>> Bob- >>> >>> >>> >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Data Technology >>> Sent: Friday, May 14, 2010 4:54 PM >>> To: WISPA General List >>> Subject: [WISPA] ack settings >>> >>> I have MT for access points and mostly UBNT for client units. >>> >>> Just wondering about the proper way to set the ack on the CPE. I have >>> always just set it for a little further than the customer on the UBNT >>> side and left the MT side to dynamic. This was set differently for each >>> customer. One might be set at 1 mile and one might be set at 5 miles. >>> >>> I read something the other day that said the ack should be set at the >>> furtherest customer plus about 10%. I read this to mean that all >>> customers should be set to the furtherest distance, is this correct? >>> >>> Also searching came up with the fact that the auto ack setting on UBNT >>> is more of a problem that a help. >>> >>> Just looking for suggestions and input on how everyone is setting the >>> client units. >>> And do I leave the access point set to dynamic or should I set it >>> statically as well? >>> >>> >>> Thanks >>> >>> >>> >>> ---------------------------------------------------------------------------- >>> ---- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> ---------------------------------------------------------------------------- >>> ---- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >>-------------------------------------------------------------------------------- >>WISPA Wants You! Join today! >>http://signup.wispa.org/ >>-------------------------------------------------------------------------------- >> >>WISPA Wireless List: wireless@wispa.org >> >>Subscribe/Unsubscribe: >>http://lists.wispa.org/mailman/listinfo/wireless >> >>Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > > > ________________________________________________________________ > Sent via the WebMail system at avolve.net > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/