What is beta 8? I've never changed the ack timeouts. I've always used dynamic (MT APs and NS2 CPEs).
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Fri, May 14, 2010 at 5:12 PM, Robert West <robert.w...@just-micro.com> wrote: > I've been doing Auto Ack since beta 8 came out and it seems to be setting it > just right but I use UBNT for the AP as well. Before that I was setting > them a little more than the center of the CPEs average distance with no > issues. > > However, with the UBNT on both sides we can also set the AirMax priority so > that the clients further out have lower priority thus the closer ones won't > suffer. With the setting of the two it's been smooth. > > Bob- > > > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Data Technology > Sent: Friday, May 14, 2010 4:54 PM > To: WISPA General List > Subject: [WISPA] ack settings > > I have MT for access points and mostly UBNT for client units. > > Just wondering about the proper way to set the ack on the CPE. I have > always just set it for a little further than the customer on the UBNT > side and left the MT side to dynamic. This was set differently for each > customer. One might be set at 1 mile and one might be set at 5 miles. > > I read something the other day that said the ack should be set at the > furtherest customer plus about 10%. I read this to mean that all > customers should be set to the furtherest distance, is this correct? > > Also searching came up with the fact that the auto ack setting on UBNT > is more of a problem that a help. > > Just looking for suggestions and input on how everyone is setting the > client units. > And do I leave the access point set to dynamic or should I set it > statically as well? > > > Thanks > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
