I'm very impressed with them. When Mid Ohio Sports Car Course opted to NOT pay 
anything for last weekends event. (Bandwidth needs..) Basically cut the $$ in 
half....

We decided to use the Ubiquiti NanoBridges 5m units. 3 hops to get there - They 
tested at 70 Mbps both directions. The long link was 5+ miles.

While the Indy guys were broadcasting HD video over them, I was watching a 
sustained 8 - 10 meg coming from the track. At the same time, they were pulling 
10 - 18 meg the other way.

This went on for most of the 4 days they were online - The units never even 
burped, much less hiccup'd....  :-)

I ran the latest firmware (Not Beta) and set them up for optimal throughput.

Now we're looking at putting them to work for our backhaul / expansion links.

-Gary-


  ----- Original Message ----- 
  From: Kurt Fankhauser 
  To: 'WISPA General List' 
  Sent: Monday, August 09, 2010 3:46 PM
  Subject: Re: [WISPA] I NEED HELP also!!!


  I'm scared of UBNT as it seems everyone that is using it seems to have 
problems here and there, this don't work, or this works now but caused this 
other thing to quit working, firmware is in Beta, seems like you guys are 
guinea pigs to me.

   

  Kurt Fankhauser

  WAVELINC

  P.O. Box 126

  Bucyrus, OH 44820

  419-562-6405

   

   


------------------------------------------------------------------------------

  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of Forbes Mercy
  Sent: Monday, August 09, 2010 12:22 PM
  To: WISPA General List
  Subject: Re: [WISPA] I NEED HELP also!!!

   

  Kurt,

  Did it fail during a heavy rain/thunderstorm storm and was it directly 
exposed without any waterproofing beyond it's own case; yes.  Can I say that 
rain caused the failure; maybe or it could have gotten an electrical surge too, 
hard to say, it just won't reset and it's junk to me now (I should point out 
$89 replacement) .  Would I let that influence if I use UBNT, no, I love their 
stuff and nearly 50% of my CPE is now Ubiquiti, the entire network had the same 
rain/thunderstorm as the one that failed and performed admirably.  The problem 
was that I had a bridged network not one failed piece of it.

  Forbes Mercy
  President - Washington Broadband, Inc.
  3201 W. Nob Hill Blvd.
  Yakima, WA  98902
  forbes.me...@wabroadband.com

  On 8/9/2010 9:06 AM, Kurt Fankhauser wrote: 

  Forbes,

   

  Curious as to if this bullet had gotten water in it or what. Someone on the 
list a while back had a bullet got water in and take down there whole network. 
If this is the case I'll factor that in when I consider deploying UBNT or not.

   

  Kurt Fankhauser

  WAVELINC

  P.O. Box 126

  Bucyrus, OH 44820

  419-562-6405

   

   


------------------------------------------------------------------------------

  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of Forbes Mercy
  Sent: Monday, August 09, 2010 11:28 AM
  To: WISPA General List
  Subject: Re: [WISPA] I NEED HELP also!!!

   

  Ron,

  I'm not really sure if you're asking about what I looked for in WireShark or 
just where is WireShark?  The program I just got from google.  Ultimately I 
went to the tower where the problem was and isolated it from the network.  Shut 
off everyone and turned them on one at a time, the IP Conflict occurred 
immediately when that person was on.  I went to their house and the 
Bullet(Ubiquiti) wouldn't reset so I pulled it, replaced it and problem gone... 
a VERY long weekend!  Let me know if you need any other help.  Those guys with 
the shirts that say how bad bridging a large network is are right on!

  Forbes

  On 8/9/2010 8:20 AM, Ron Wallace wrote: 

   Forbes,

  I am experiencing a Similar or The same problem You had.  Could you share the 
Wireshark you learned from Brett?

  Ron Wallace 
  Hahnron, Inc. 
  220 S. Jackson Dt. 
  Addison, MI 49220 

  Phone: (517)547-8410 
  Mobile: (517)270-2410 
  e-mail: rwall...@newgenet.net 
  rwall...@tigernet.bz 

   

    -----Original Message-----
    From: Forbes Mercy [mailto:forbes.me...@wabroadband.com]
    Sent: Monday, August 2, 2010 12:21 AM
    To: 'WISPA General List'
    Subject: Re: [WISPA] I NEED HELP

    Hey whoever forwarded my issue to Brett thanks, he pointed out how to 
isolate individual bridges with WireShark. I did that and found the tower, it's 
too late today but having that tower down brought the rest of the system back 
up. As Marlon said "so will you be routed tomorrow?" Well maybe not tomorrow 
but the switchover from Bridged to Routed is about my highest priority now. I 
missed a great summer weekend chasing this down and all of you helped me 
tremendously. Thanks so much for once again reminding me how great it is being 
in WISPA. Forbes 
--------------------------------------------------------------------------------
 WISPA Wants You! Join today! http://signup.wispa.org/ 
--------------------------------------------------------------------------------
 WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: 
http://lists.wispa.org/mailman/listinfo/wireless Archives: 
http://lists.wispa.org/pipermail/wireless/ 

    
--------------------------------------------------------------------------------WISPA
 Wants You! Join 
today!http://signup.wispa.org/--------------------------------------------------------------------------------
 WISPA Wireless List: wireless@wispa.org 
Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless 
Archives: http://lists.wispa.org/pipermail/wireless/ 

    
--------------------------------------------------------------------------------WISPA
 Wants You! Join 
today!http://signup.wispa.org/--------------------------------------------------------------------------------
 WISPA Wireless List: wireless@wispa.org 
Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless 
Archives: http://lists.wispa.org/pipermail/wireless/ 



------------------------------------------------------------------------------




  
--------------------------------------------------------------------------------
  WISPA Wants You! Join today!
  http://signup.wispa.org/
  
--------------------------------------------------------------------------------
   
  WISPA Wireless List: wireless@wispa.org

  Subscribe/Unsubscribe:
  http://lists.wispa.org/mailman/listinfo/wireless

  Archives: http://lists.wispa.org/pipermail/wireless/

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to