I hit start, down, 1-8, enter and I'm ready to go in <5 seconds. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Aug 20, 2010 at 5:37 PM, John Valenti <vale...@lir.msu.edu> wrote: > Justin, > I would think you would want to have it setup to just switch quickly to a > static address via profile or script or something. > > But perhaps another solution would be to use a switch or hub? If your windows > computer is plugged into that (rather than directly into a radio), it will > keep ethernet carrier and not want to look for a new address every time you > switched radios. So it would just keep using the autoassigned one. (I think) > > I don't use Mikrotik much, I vaguely remember it uses a program that manages > radios without using IP addressing? Perhaps that is why your auto assigned > 169. address is of any value. Almost all the radios I've used (Trango, > Tranzeo, StarOS) you have to use a specific subnet (not auto assigned) to > talk to it. So I started out with a system that let me rapidly switch between > a few statics and dhcp. > > Hope that helps. > > On Aug 20, 2010, at 4:01 PM, Justin Wilson wrote: > >> The whole thing is windows takes so long if there is no DHCP server >> available. For example, plug into a fresh Mikrotik with no configuration. >> How long does Windows take to time out if it is set to DHCP? I have timed >> this at 1.5 minutes. My mac only takes 17 seconds to say “hey there is no >> DHCP server I will auto assign a 169 IP”. What I am looking for is a way to >> tell Windows don’t wait 1.5 minutes before you assign a 169 IP. Only wait >> 20 seconds or whatever. >> >> Sure you can assign a static IP and lessen this time, but assigning that >> IP takes time to do and undo. >> >> The best solution I have seen so far is Barnes’s suggest for a program >> that lets you change networking profiles. I was hoping someone knew of a >> registry key you could edit. Something like DHCP_TIMEOUT=20s. Instead of >> DHCP_TIMEOUT=120s. > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
