Since you have 6 non-overlapping channels that you can use, with only
three radios, you do not need the
CMM timing.  You can have each radio generate sync.  This changes if
you have other canopy 5.7 gear on the towers.

Marco Coelho

On Sat, Aug 21, 2010 at 11:03 PM, Josh Luthman
<j...@imaginenetworksllc.com> wrote:
> You can use a parasitic thing from Packet Flux.  Or CTM.
>
> On Aug 21, 2010 11:06 PM, "Edward Spoon" <edsp...@gmail.com> wrote:
>
> Trying to get a definitive answer here and Moto ain't a helpin'!
> For a site with 2 or 3 5720BH units (all links PtP - no AP-SU traffic), do I
> 'have to' use a CMM? I'd prefer to bring each link inside on a separate wire
> to isolate them in the router for failover configuration. Can't do much with
> them if they are all on one wire in one interface.
> Thanks
> Ed
> triparish.net
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



-- 
Marco C. Coelho
Argon Technologies Inc.
POB 875
Greenville, TX 75403-0875
903-455-5036


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to