If you are starting from no 5.7AP's you could get away with with no sync, but 
without a baseline you will not know how much not having sync will hurt you. 
Having been running 3 5750AP's on a mountain top for over 5 years my 
recommendation is to use sync. 

If you only have one tower and no other Canopy AP's within earshot, you can do 
it the cheap and easy way by setting one AP to generate sync, and the other two 
to receive sync on the timing port. Tie the 3 timing ports together on all 
three AP's and they will be in sync with each other.

A couple of alternatives to the CMM are 
- PacketFlux SyncPipes
- Last Mile Gear


- Jerry


-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf 
Of Marco Coelho
Sent: Monday, August 23, 2010 6:45 AM
To: WISPA General List
Subject: Re: [WISPA] CMM Required?

Since you have 6 non-overlapping channels that you can use, with only
three radios, you do not need the
CMM timing.  You can have each radio generate sync.  This changes if
you have other canopy 5.7 gear on the towers.

Marco Coelho

On Sat, Aug 21, 2010 at 11:03 PM, Josh Luthman
<[email protected]> wrote:
> You can use a parasitic thing from Packet Flux.  Or CTM.
>
> On Aug 21, 2010 11:06 PM, "Edward Spoon" <[email protected]> wrote:
>
> Trying to get a definitive answer here and Moto ain't a helpin'!
> For a site with 2 or 3 5720BH units (all links PtP - no AP-SU traffic), do I
> 'have to' use a CMM? I'd prefer to bring each link inside on a separate wire
> to isolate them in the router for failover configuration. Can't do much with
> them if they are all on one wire in one interface.
> Thanks
> Ed
> triparish.net
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



-- 
Marco C. Coelho
Argon Technologies Inc.
POB 875
Greenville, TX 75403-0875
903-455-5036


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to