Yes it works. You can define one port as the uplink port, then the others cannot see each other, only the uplink port. This is strictly port based vlan.
On Mon, Aug 23, 2010 at 9:19 AM, Edward Spoon <[email protected]> wrote: > Actually, I was looking at the VLAN function and it appears that I could get > the results I want with that. Is anyone familiar enough with these to know > if the VLAN "port isolation" works as advertised. ie: restrict radio on port > 1 to talk only to port 2, port 3 only talk to port 4, etc. so that I can > isolate legs into different router interfaces. > Thanks > > On Mon, Aug 23, 2010 at 8:44 AM, Marco Coelho <[email protected]> wrote: >> >> Since you have 6 non-overlapping channels that you can use, with only >> three radios, you do not need the >> CMM timing. You can have each radio generate sync. This changes if >> you have other canopy 5.7 gear on the towers. >> >> Marco Coelho >> >> On Sat, Aug 21, 2010 at 11:03 PM, Josh Luthman >> <[email protected]> wrote: >> > You can use a parasitic thing from Packet Flux. Or CTM. >> > >> > On Aug 21, 2010 11:06 PM, "Edward Spoon" <[email protected]> wrote: >> > >> > Trying to get a definitive answer here and Moto ain't a helpin'! >> > For a site with 2 or 3 5720BH units (all links PtP - no AP-SU traffic), >> > do I >> > 'have to' use a CMM? I'd prefer to bring each link inside on a separate >> > wire >> > to isolate them in the router for failover configuration. Can't do much >> > with >> > them if they are all on one wire in one interface. >> > Thanks >> > Ed >> > triparish.net >> > >> > >> > >> > >> > >> > -------------------------------------------------------------------------------- >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> > -------------------------------------------------------------------------------- >> > >> > WISPA Wireless List: [email protected] >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> > >> > >> > >> > -------------------------------------------------------------------------------- >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> > -------------------------------------------------------------------------------- >> > >> > WISPA Wireless List: [email protected] >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> >> >> -- >> Marco C. Coelho >> Argon Technologies Inc. >> POB 875 >> Greenville, TX 75403-0875 >> 903-455-5036 >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Marco C. Coelho Argon Technologies Inc. POB 875 Greenville, TX 75403-0875 903-455-5036 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
