Actually, I was looking at the VLAN function and it appears that I could get the results I want with that. Is anyone familiar enough with these to know if the VLAN "port isolation" works as advertised. ie: restrict radio on port 1 to talk only to port 2, port 3 only talk to port 4, etc. so that I can isolate legs into different router interfaces.
Thanks On Mon, Aug 23, 2010 at 8:44 AM, Marco Coelho <coelh...@gmail.com> wrote: > Since you have 6 non-overlapping channels that you can use, with only > three radios, you do not need the > CMM timing. You can have each radio generate sync. This changes if > you have other canopy 5.7 gear on the towers. > > Marco Coelho > > On Sat, Aug 21, 2010 at 11:03 PM, Josh Luthman > <j...@imaginenetworksllc.com> wrote: > > You can use a parasitic thing from Packet Flux. Or CTM. > > > > On Aug 21, 2010 11:06 PM, "Edward Spoon" <edsp...@gmail.com> wrote: > > > > Trying to get a definitive answer here and Moto ain't a helpin'! > > For a site with 2 or 3 5720BH units (all links PtP - no AP-SU traffic), > do I > > 'have to' use a CMM? I'd prefer to bring each link inside on a separate > wire > > to isolate them in the router for failover configuration. Can't do much > with > > them if they are all on one wire in one interface. > > Thanks > > Ed > > triparish.net > > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -- > Marco C. Coelho > Argon Technologies Inc. > POB 875 > Greenville, TX 75403-0875 > 903-455-5036 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/