Not according to Garp! On Fri, Sep 24, 2010 at 9:14 PM, Philip Dorr <[email protected]>wrote:
> It works perfectly fine if you power through the secondary port. > > On Fri, Sep 24, 2010 at 8:05 PM, RickG <[email protected]> wrote: > > I was skeptical of the poe passthrough sicne I first saw it and this is > why. > > On repeaters, it would be so tempting to just run one wire but I've stuck > > with two. It will be interesting to see if it gets fixed. Thanks for > > sharing! > > > > On Fri, Sep 24, 2010 at 8:50 PM, Robert West <[email protected] > > > > wrote: > >> > >> Today I finally figured out an Issue I’ve been having with a > >> NanoStation5M. I have a customer who wanted service, was in trees but > had > >> a hot signal out at the road. Dug a 4 foot hole, put in 2 10 foot > sections > >> of rigid conduit and 5 bags of concrete. Ran an underground line of > Cat5e, > >> double shielded and flooded cable with ground wire to his house. That > was 5 > >> months or so ago. At the beginning of August, he called me and said his > >> neighbor wanted service. Same trees so I took the AirGrid down, put up > a > >> Nano5M and plugged a Nano loco2 into the secondary port and shot it at a > >> second Nano Loco2 at his place. Replaced my weird Airgrid > >> > >> > >> > >> Worked perfectly, everyone happy. 2 weeks ago I get a call, neighbor > not > >> working. I go out, no power light on the Nano at the pole. I figure, > bad > >> crimp……. Take it down, make up a new wire to connect the two, fires up. > >> All good. 2 days later, same issue. I reset it all to defaults, > >> reconfigure, all okay. 2 days later, same thing. I downgrade firmware > to > >> 5.2. Couple of days later, no signal again. I’ll also add I was > getting > >> some “weird” lag at the AP that this setup was feeding off of. So I > was > >> fighting two battles. Then today, I find that the PoE Pass Through > check > >> box is empty. DUH! I check it, apply, comes back empty. I do it > again, > >> same issue. I go out and I can connect my laptop through the secondary > port > >> but it will not give any voltage. > >> > >> > >> > >> I checked my lag time issue at the AP. GONE! > >> > >> > >> > >> I then checked in the UBNT forums…………. It’s an issue. After 20 days > PoE > >> on the secondary Nano port starts to die. Replaced it with another > Nano5M, > >> working fine but looks like I’ll be coming up with another MacGyver > solution > >> to service this dude………. > >> > >> > >> > >> Just so ya knows. > >> > >> > >> > >> Bob- > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: [email protected] > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
