So you're saying if the secondary port is the one receiving power it will pass power to the primary port no matter what the state of the "pass through" check box? That's cool to know.
Greg On Sep 25, 2010, at 9:58 AM, Philip Dorr wrote: > Nothing, it will constantly stay on. Of course you cannot turn off > the second radio. > > On Sat, Sep 25, 2010 at 10:17 AM, Stuart Pierce <spie...@avolve.net> wrote: >> >> Are you serious ? What if the poe checkbox gets unchecked ? >> >> ---------- Original Message ---------------------------------- >> From: Philip Dorr <wirel...@judgementgaming.com> >> Reply-To: WISPA General List <wireless@wispa.org> >> Date: Sat, 25 Sep 2010 08:37:58 -0500 >> >>> input power in the "secondary" port and use the "main" port to power >>> the second radio >>> >>> On Fri, Sep 24, 2010 at 8:39 PM, Robert West <robert.w...@just-micro.com> >>> wrote: >>>> Eh?  What ya mean??? >>>> >>>> >>>> -----Original Message----- >>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>>> Behalf Of Philip Dorr >>>> Sent: Friday, September 24, 2010 9:14 PM >>>> To: WISPA General List >>>> Subject: Re: [WISPA] UBNT Nano5M Secondary RJ45 Port PoE Burnout! >>>> >>>> It works perfectly fine if you power through the secondary port. >>>> >>>> On Fri, Sep 24, 2010 at 8:05 PM, RickG <rgunder...@gmail.com> wrote: >>>>> I was skeptical of the poe passthrough sicne I first saw it and this is >>>>> why. >>>>> On repeaters, it would be so tempting to just run one wire but I've >>>>> stuck with two. It will be interesting to see if it gets fixed. Thanks >>>>> for sharing! >>>>> >>>>> On Fri, Sep 24, 2010 at 8:50 PM, Robert West >>>>> <robert.w...@just-micro.com> >>>>> wrote: >>>>>> >>>>>> Today I finally figured out an Issue I’ve been having with a >>>>>> NanoStation5M.  I have a customer who wanted service,  was in  trees >>>>>> but had a hot signal out at the road.  Dug a 4 foot hole, put in 2 10 >>>>>> foot sections of rigid conduit and 5 bags of concrete.  Ran an >>>>>> underground line of Cat5e, double shielded and flooded cable with >>>>>> ground wire to his house.  That was 5 months or so ago.  At the >>>>>> beginning of August, he called me and said his neighbor wanted >>>>>> service.  Same trees so I took the AirGrid down, put up a Nano5M and >>>>>> plugged a Nano loco2 into the secondary port and shot it at a second >>>>>> Nano Loco2 at his place.  Replaced my weird Airgrid >>>>>> >>>>>> >>>>>> >>>>>> Worked perfectly, everyone happy.  2 weeks ago I get a call, neighbor >>>>>> not working.  I go out, no power light on the Nano at the pole.  I >>>>>> figure, bad crimp…….  Take it down, make up a new wire to connect >>>>>> the two, fires up. >>>>>> All good.  2 days later, same issue.  I reset it all to defaults, >>>>>> reconfigure, all okay.  2 days later, same thing.  I downgrade >>>>>> firmware to 5.2.  Couple of days later, no signal again.  I’ll also >>>>>> add I was getting some “weird† lag at the AP that this setup was >>>>>> feeding off of.  So I was fighting two battles.  Then today, I find >>>>>> that the PoE Pass Through check box is empty.  DUH!  I check it, >>>>>> apply, comes back empty.  I do it again, same issue.  I go out and I >>>>>> can connect my laptop through the secondary port but it will not give >>>>>> any voltage. >>>>>> >>>>>> >>>>>> >>>>>> I checked my lag time issue at the AP.  GONE! >>>>>> >>>>>> >>>>>> >>>>>> I then checked in the UBNT forums………….  It’s an issue.  >>>>>> After 20 days >>>>>> PoE on the secondary Nano port starts to die.  Replaced it with >>>>>> another Nano5M, working fine but looks like I’ll be coming up with >>>>>> another MacGyver solution to service this dude………. >>>>>> >>>>>> >>>>>> >>>>>> Just so ya knows. >>>>>> >>>>>> >>>>>> >>>>>> Bob- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> --------------------------------------------------------------------- >>>>>> ----------- >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>>>> --------------------------------------------------------------------- >>>>>> ----------- >>>>>> >>>>>> WISPA Wireless List: wireless@wispa.org >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> >>>>> >>>>> ---------------------------------------------------------------------- >>>>> ---------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> ---------------------------------------------------------------------- >>>>> ---------- >>>>> >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> ________________________________________________________________ >> Sent via the WebMail system at avolve.net >> >> >> >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
