That was my next reply to Josh.what series or model of Ceragon has he used. All our Ceragon links have been the older Fibeair 1500 series. There were a few re-branded versions of this radio for Nortel and maybe another name too. I think even Lockheed or General Dynamics had these relabeled under their name.
Agreed, while price is always important we feel a solid product with good support is paramount. While Trango may have had some early firmware issues they have been responsive and resolved any issues that resulted in a down link situation. Best, Brad From: [email protected] [mailto:[email protected]] On Behalf Of Bob Moldashel Sent: Friday, November 05, 2010 7:50 AM To: WISPA General List Subject: Re: [WISPA] Licensed 11ghz Hops Ceragon today is NOT the same Ceragon it was 3 years ago. Unlike many here when it comes to choosing equipment I don't chase the price point. I look at who supplies the outstanding support. I look for the company that has my back when I am up against the wall with a dead link. And until someone can blow away their delivery schedule and their technical/customer support, Dragonwave is my company of choice for licensed microwave. Radio clips to the antenna, POE, simple interface, easy equipment replacement. And most importantly..... the sh*t works! I can't remember EVER needing to do a firmware upgrade on a Dragonwave radio to make it work right. I can't say that for many of the other manufacturers and I have installed a lot of different equipment over the years. -B- On 11/4/2010 10:15 PM, Josh Luthman wrote: The air must be different there. I can't stand Ceragon stuff. Nothing but problems. Zero support. The firmware is terrible as is the interface. On Nov 4, 2010 9:58 PM, "Brad Belton" <[email protected]> wrote: > Agreed. We have had Ser# 00000001 11GHz Trango GigaLINK in service since early 2008 among several others since then with great service. The few times we've needed Trango support they have been extremely responsive and helpful. > > > > I think we also have one of the first if not the first 18GHz GigaLINK in service too since mid 2007. We'll be hanging three more Trango Giga's & Apex's in the next few weeks. We have always been early adopters of Sunstream/Trango equipment. > > > > We have DragonWave, BridgeWave, Trango, DMC, Ceragon and PCOM licensed gear deployed and active in 6GHz, 11GHz, 18GHz, 23GHz, 38GHz and 70-80GHz on our network. By far the Trango, BridgeWave and Ceragon links are our favorites. > > > > Best, > > > > > > Brad > > > > > > > > From: [email protected] [mailto:[email protected]] On Behalf Of Blake Covarrubias > Sent: Thursday, November 04, 2010 5:21 PM > To: WISPA General List > Subject: Re: [WISPA] Licensed 11ghz Hops > > > > We use Trango GigaLinks almost exclusively in our network; 6ghz, 11ghz, 18ghz, and 23ghz. They work very well & support thus far has been great. > > > -- > > Blake Covarrubias > > > On Nov 4, 2010, at 14:43, "Nick Olsen" <[email protected]> wrote: > > I've worked with a few of the Trango Apex 11ghz links. Running 256QAM they will do ~258Mb/s full duplex, or something like that. > .8 to 1ms across it, With 10Mb/s or 200Mb/s of traffic on it. So far, They've been the best links I've had the pleasure of working with. In terms of performance, And management. > > Nick Olsen > Network Operations > > (855) FLSPEED x106 > > <http://www.flhsi.com/files/emaillogo.jpg> > > > > > _____ > > > From: "David E. Smith" <[email protected]> > Sent: Thursday, November 04, 2010 5:32 PM > To: "WISPA General List" <[email protected]> > Subject: Re: [WISPA] Licensed 11ghz Hops > > > > > On Thu, Nov 4, 2010 at 16:20, Matt <[email protected]> wrote: > > We are looking at upgrading our network and adding a handful(7) 11ghz > licensed hops. What gear out there can use both horizontal and > vertical at once to increase throughput? We are currently considering > Exalt. Short coming of 11 ghz and longish 25 mile hops is throughput. > We do not need a lot of bandwidth at the start but would like to be > ready to if needed. This will replace a couple DS3 circuits. > > > > How much throughput do you need? Trango's Apex gear can, if you have big enough antennas and pay for the licensing (both FCC and for Trango's software), do something like 300Mbps. > > > > David Smith > > MVN.net > > > > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
