|
Especially with those small, cheap 2-cycle, 800-1000W generators, a
200-400W light stabilizes it well. -- On 5/8/2013 1:27 PM, Joel Mulkey wrote:
We've noticed that our cheap generators won't charge the UPSs back up without some extra load to stabilize things. To provide that load we include a 500w or 1000w halogen construction light with each generator kit. Plug the light in and the voltage stabilizes, which allows the UPS to kick back on to the line power. It also provides some nice lighting if it's at night.Joel Mulkey CIO Freewire Direct: 503-616-2557 | Support: 503-614-8282 http://www.gofreewire.com http://twitter.com/FreewireNetwork On May 8, 2013, at 10:17 AM, [email protected] wrote:This is the third time in about two years that we've had some major power outages across our region due to the supplier lines going down. Every time the situation is the same, We roll out our portable generators to a few of our smaller sites that don't have full-time generators -- and every time we have to fight with them to get clean power out of them -- usually just ending up putting equipment directly on the generators and bypassing the UPS systems. I've seen the generators go everywhere from 40Hz to 90Hz. Has anyone come across a nice portable alternator (as opposed to a generator) that can be taken to tower sites as supplementary power? ~ Matt_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC |
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
