I have a network with about 800 devices running OSPF. If you need more
help, let me know.
I do consulting for several WISPs helping get from bridged to routed,
setting up routers correctly, etc.
If is is easy, no charge. If is going to take some time/effort, I
charge $65.00/hour for the actual time involved, no minimum. Let me
know what I can do to help.
On 7/20/2013 1:43 PM, Chris Fabien wrote:
I need to get OSPF running on the network linking our 4 core towers -
had a heat related failure on a mikrotik radio cause an outage this
week. We have enough links that we could set this up for redundancy
but only have static routing in place, so I had to manually route
around the down link.
I have a bench setup running based on the Mikrotik Wiki example, it's
running and working, but I'm stuck on the part where I assign
cost/distance/priority or whatever the term is to make it decide one
link over another. I'm not really grasping how that works.
Any suggestions for a tutorial or documentation which explains that,
or if it's simple, maybe just tell me what I need to do?
I want to be able to assign priority to the links so that it won't
always take the least # of hops path, we have a redundant link between
two main towers which is an old nanobridge link and want to reserve it
as the backup link.
Thanks for any advise!
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 2013.0.3349 / Virus Database: 3204/6506 - Release Date: 07/20/13
--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration
Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060
(765) 439-4253
(855) 231-6239
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
