Luciano, you were just the last poster in the thread. I don't mean this towards you, but to everyone talking about Mikrotik.
Mikrotik has no ability that I am aware of for true roaming. The closest its going to have is the ability to kick you off, forcing you to look for something better. Mikrotik on the client side (I assume) is outside of the scope of this conversation as most people aren't going to have a Mikrotik device in their pocket. They're using a cell phone. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Luciano - Computech Tecnologia" <luciano.comput...@gmail.com> To: "WISPA General List" <wireless@wispa.org> Cc: "WISPA General List" <wireless@wispa.org> Sent: Saturday, September 7, 2013 10:48:39 PM Subject: Re: [WISPA] 802.11 and roaming Blair Using a Mikrotik as an Indoor AP You can put in access list a 00:00:00:00:00:00 mac address and uncheck default autentication in the wireless interface. Here I recommend 0..-75 in the acl signal strenght range for a perfect roaming. It always works fine. Mikrotik will kick the low -75 client and it will connect in the new next AP with the same SSID. Same layer2 DS and diferent channel. Siga a Computech no Twitter @computechloja @lucianofranz Youtube: www.youtube.com/computechloja Facebook: www.facebook.com/computechloja www.computechloja.com.br 0xx51 3230-0900 ven...@computech.com.br Em 08/09/2013, às 00:32, Amin Dashti < dash...@gmail.com > escreveu: Have you checked Mikrotik's wireless access list? Configure "Signal Strength Range" option to disconnect sticky wireless clients (who have low signal) Best, Amin Amin Dashti Mikrotik Info (949)385-2171 dash...@mikrotikinfo.com From: wireless-boun...@wispa.org [ mailto:wireless-boun...@wispa.org ] On Behalf Of Blair Davis Sent: Saturday, September 07, 2013 8:20 PM To: WISPA General List Subject: [WISPA] 802.11 and roaming I've tried MikroTik. I've tried Cisco. I've tried UniFi. I pretty much don't think there is a working way to roam from AP to AP with 802.11 in an open system. The client holds on to the weak AP long after there are stronger AP's to talk to. I think this is just the way it works. Now, we are giving each AP a unique ESSID but keeping them bridged on the wired side and requiring the user to change the connection when out of range... Not the best answer, but it works much better for the clients who don't move much... I'd love a better answer... -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648 A Division of: Camp Communication Services, INC _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
