On 27/05/2015 21:17, Joe Taylor wrote:
Hi all,
Hi Joe,
With SVN revision 5427 I have committed files to build the WSJT-X User
Guide for Version 1.5. I would greatly appreciate a careful reading by
others! Please report mistakes, typos, unclear text, or any other need
for improvements to this list.
Reviewing the user guide I see the following issues:
The link http://physics.princeton.edu/pulsar/K1JT/kv-installer.txt is
referenced but doesn't yet exist.
The anchor
file:///C:/build/wsjtx-dev/Debug/doc/wsjtx-main.html#COMP_CALL is
referenced but doesn't exist.
Sect. 4.2 Radio - CAT Control - Force Control Lines should now say
something like:
"A few station setups require the CAT serial port’s *RTS* and/or
*DTR* control lines to be forced high or low. Check these boxes only if
you are sure they are needed."
Sect. 4.2 Radio - CAT Control - PTT Method - should say:
"... select the desired serial port which may be the same one as
used for CAT control."
Sect.6.1 Main Window Settings - here and elsewhere it may be helpful to
mention that the sliders and spin box controls in WSJT-X respond to both
arrow key presses and and Page UP/Down key presses with the page keys
moving in larger increments.
Sect. 6.2 Wide Graph Settings - Gain - spurious ','.
Sect. 8.3 Misc Controls Left - the Icom rigs warning should be extended
to say something like:
"Many Icom rigs cannot be queried for split status, current VFO
nor split transmit frequency, so you should not change the current VFO,
split status or frequency using rig controls when using /WSJT-X/."
Sect 8.4 Misc Controls Center - broken link in the first bullet point.
73
Bill
G4WJS.
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
