On 12/06/2015 17:04, char...@sucklingfamily.free-online.co.uk wrote: > Hi Joe, Rex and All Hi Charlie, > > > Yes, this is the "problem": > > "Misbehaviour is Halt not 'disarming' Enable TX (which stays red after > pressing Halt ) so that on the next TX sequence the program still > transmits. After a Halt press while transmitting, transmit audio tones do > stop immediately (and PTT puts rig back on receive) but yellow status > message shows Txing until t=50s, when it changes to indicate receiving." A yellow Tx status indicator implies JT65 mode, is that the mode you are using? > > Additionally, if TX Enable is red, and Halt pressed during a receive > period, it also stays red. Does this always misbehave or does it sometimes disable "Enable Tx" when "Halt" is clicked in an Rx period? > > I just built r5598 and found it to have the "problem" - machine is Win7 > 64bit. > > The recipe to see it is just normal operation of the program. I've tried > it with radio connected normally, no radio selected, with/without Astro > window open and several modes and behaviour is identical. > > Enable TX does toggle as expected. > > It does not affect normal operation. To finish a QSO and cease further > transmission I toggle Enable back to not red. In the past I had just used > Halt.
... > [I had got used to using Enable for 3 sec then Halt to transmit and > receive a single EME echo, but this is not now possible (instead a toggle > of Tune works fine)]. "Enable Tx" will only transmit immediately if the current period is the selected Tx period. Are you saying that "Enable Tx " no longer starts transmission even in the selected transmission period? > > I notice also that the message next to the green timer always says "TX > enable disarmed" at all times. IN the past on earlier releases I recall > this message changed according to the state of TX Enable. The status bar item "Tx-Enable Armed" indicates that the option in "Settings->General" "Double-click on call sets Tx enable" is checked. It indicates that double-clicking a decode will turn on "Enable Tx" if it is not already on. > > At home, Vista 32 bit, all earlier releases up to a certain time, behave > "correctly". Recent ones and certainly r5586, have the bad behaviour. > There is one release I have that has different behaviour on the two > computers - if that is of interest I will try to identify which version > that is. > > 73 > > Charlie 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
