Hi Bill Thanks. Will take a look tomorrow.
73 Charlie > On 12/06/2015 16:04, Joe Taylor wrote: > Hi Joe & All, >> Hi Charlie, Rex, and all, >> >> I'm copying this response to the wsjt-devel list, since that's where it >> really belongs. >> >>> While the Halt TX problem persists, I realised single shot echoes can >>> still >>> be done with Tune button. >> By the "Halt TX problem" I take it you mean the behavior described in >> your email to wsjt-devel on June 10: >> >> "Misbehaviour is Halt not disarming Enable TX (stays red) so that on >> next TX sequence the program still transmits. After a Halt press, tones >> do stop immediately (and PTT puts rig back on receive) but yellow status >> shows Txing until t=50s, when it indicates receiving." >> >> As far as I know, none of us who are writing code has been able to >> reproduce this bad behavior. Any help you can provide (in the way of a >> recipe to make it happen with the most recent code revision) will be >> much appreciated! Certainly if the behavior is unintended we should try >> to fix it; but it might also be helpful to understand how the bad >> behavior adversely affects what you normally want to do. > I have diagnosed and fixed this issue in r5601. >> >> -- 73, Joe, K1JT > 73 > Bill > G4WJS. > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
