On 12/06/2015 16:04, Joe Taylor wrote: Hi Joe & All, > Hi Charlie, Rex, and all, > > I'm copying this response to the wsjt-devel list, since that's where it > really belongs. > >> While the Halt TX problem persists, I realised single shot echoes can still >> be done with Tune button. > By the "Halt TX problem" I take it you mean the behavior described in > your email to wsjt-devel on June 10: > > "Misbehaviour is Halt not disarming Enable TX (stays red) so that on > next TX sequence the program still transmits. After a Halt press, tones > do stop immediately (and PTT puts rig back on receive) but yellow status > shows Txing until t=50s, when it indicates receiving." > > As far as I know, none of us who are writing code has been able to > reproduce this bad behavior. Any help you can provide (in the way of a > recipe to make it happen with the most recent code revision) will be > much appreciated! Certainly if the behavior is unintended we should try > to fix it; but it might also be helpful to understand how the bad > behavior adversely affects what you normally want to do. I have diagnosed and fixed this issue in r5601. > > -- 73, Joe, K1JT 73 Bill G4WJS.
------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
