Hi Bill and Mike, > On Jul 11, 2015, at 5:55 PM, Bill Somerville <[email protected]> wrote: > > On 08/07/2015 02:13, Steven Franke wrote: >> Bill, > Hi Steve, >> >> In the past couple of hours since updating to r5700 I have had four rig >> control error events after many weeks of flawless operation. “Command >> rejected by the rig while setting frequency” >> >> After program startup the error has occurred after only 1 and as many as 4 >> transmissions. >> >> It looks like Tx Enable is dis-abled when the error is thrown. Thereafter >> the rig stays on whatever band it was on when the error was thrown, but the >> program continues to hop through different bands, causing spots to be >> reported on the wrong band. >> >> This behavior is completely new to me, and it happened immediately after >> updating to r5700. I’m not sure what revision I was on before the problem >> started, but it was certainly no earlier than r5685. Has anything changed in >> the last few revisions that might affect control of a TS-480? e.g. timing or >> delay changes maybe? > This should be fix as of 5714. I do not have a rig that would exhibit > the problem so I would appreciate any test reports from Kenwood users, > particularly TS-480 and TS-2000 owners. > > The defect manifests itself when using WSPR band hopping and either CAT > or hard switched PTT i.e. not VOX PTT or equivalent such as using a > SignalLink USB interface. It happened at the end of transmit periods > when a band change was being requested before PTT was dropped.
That seems to have solved the problem for me. r5714 has been running for 2 hours now, transmitting at 34% and bandhopping, with no problems. Thanks very much for hanging in there to solve this problem! Steve k9an >> >> Steve k9an > 73 > Bill > G4WJS. > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
