Am I confused? This is how I would expect it to behave...
Monitor on -> change mode -> Monitor still onMonitor off -> change mode ->
Monitor stays off
Under what condition do you have monitor off and then want it to come on
outside of your control? Don't the vast majority just keep monitor on 24x7?
Mike W9MDB
From: Bill Somerville <[email protected]>
To: [email protected]
Sent: Friday, June 10, 2016 10:18 AM
Subject: Re: [wsjt-devel] Start Monitor when switching modes?
On 10/06/2016 16:06, Joe Taylor wrote:
> I think I see it the way Mike does: just leave monitor alone, let it
> stay the way it was set when doing a band change.
Hi Joe & Mike,
the thinking was that changing frequency in WSJT-X must mean that you
want to listen to that frequency. I can't think of a good reason not to
turn on monitor for a frequency change. OTOH because WSJT-X changes
frequency automatically to the first defined working frequency for a
mode when changing mode; this has the downstream consequence of enabling
monitor.
I'm not sure that a testing requirement to not have monitor come on
while changing modes between playing back WAV files justifies disabling
a potentially useful feature. As a possible alternative you could set up
a configuration with no working frequencies defined. To do that:
1) clone the current configuration,
2) rename the clone to "testing" or whatever you wish,
3) switch to the new configuration,
4) in "Settings->Frequencies" click a working frequency, type CTRL+A,
right-click and select "Delete".
That will mean that whenever that configuration is selected mode changes
will have no impact on rig control nor monitor state.
73
Bill
G4WJS.
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
