Dear Sir, I am Yukio Iizumi, JG1APX. First of all, I would like to say my appreciation to all members of development team. I am using wsjt-x recently for QRA64 and MSK144 other than JT65 and JT9, and I have built the application with JTSDK for the latest test version. Then, I noticed that QRA64 mode is unstable. I would like to report the phenomenon occurs on my PC.
Followings are the details : Program version : wsjt-x 1.7.0 GA r7405 Operating system : Windows 10 Version 1607 (2 different models) Concise description of the problem : Once "Decode" is turned on with light bule in QRA64A mode, it is kept turning on continuously. It will not disappear. Transmission can be performed in TX state, but decode is nothing even tuning on the opposite frequeny. Exact sequence of steps required to reproduce the problem : Special sequence of steps is not required on my PC. Start the wsjt-x and set to QRA64 mode. You will find the phenomenon at next RX state if it will happen on your PC. To close and restart the application is not effective. My checking result on previous version : Please note that I did not build the application every test release. Before 1.7.0-rc3 r7380 : OK 1.7.0-rc3 r7384 : NG 1.7.0-rc3 r7396 : NG 1.7.0-GA r7405 : NG ( was downloaded from WSJT home page) 1.7.1-devel r7412 : NG 1.7.1-devel r7415 : OK 1.7.1-devel r7424 : OK By the way, I know the stations which have the same issue. I want to help them, so I hope I would like to have your approval for sending them the built application under developping until the issue is resolved. I appreciate that you read my report by last which is written in LOL. HNY Best regards, Yukio Iizumi, jg1apx -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
