Didn't see this reported, so I don't know if this is normal, a bug, or
just not tested.
Switching configurations from what I have setup for FT8 to the 'normal'
JT65/JT9 setup, the frequency does not move from the FT8 to the JT modes
frequency. This also occurs going the other way. The only way to reset
the frequency is to either re-select the mode from the mode menu where
its already set in the saved configuration, or re-select the band from
the drop down.
I already have two configurations setup for use. The 'normal'
configuration for JT65/JT9 slow modes, and the FT8 configuration.
To reproduce:
1. Change to a different configuration. The system does not reset the
frequency.
2. Re-select band, program changes frequency.
3. Change to a different configuration. The system does not reset the
frequency.
4. Re-select the mode from the mode menu, program changes frequency.
I'm thinking that there's no command sent to the radio to change the
frequency from the last setting. I'm using DX Commander connected to a
KX3, controlling frequencies and tranmission.
Neil, KN3ILZ
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel