On 05/05/2018 10:27 PM, Al Pawlowski wrote: Hi Al & All,
> Manual not real clear about what “fake it” actually does. If my observation is right, the real split mode is using the secondary VFO of your XCVR, sometimes set to a different frequency as the main VFO, as the VFO of the TX phase. In contrast, in fake split mode, only the main VFO is used and its frequency is changed sometimes during the TX phase. The goal is always to maintain the audio frequency, during the TX phase, in the 1500 to 2000 Hz range. You can only use the real split mode if your rig has a secondary VFO and if it's capable of switching the VFO's using CAT commands. Please correct me if I'm wrong. Best wishes, Claude (DJ0OT) ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
