Hi all,
I have already mentioned what my FT-847 does when I as a hound choose
'Rig': It switches the radio to SAT mode!
So I can use 'Rig' only.
It' s no problem at all.
Otherwise I do not know why the waterfall is always grey in DXe rc4.
It has not been grey when I used rc3.
gl de ha6nn
Andras
On Sun, May 6, 2018 at 6:21 AM, Claude Frantz <claude.fra...@bayern-mail.de>
wrote:
> On 05/05/2018 10:27 PM, Al Pawlowski wrote:
>
> Hi Al & All,
>
> > Manual not real clear about what “fake it” actually does.
>
> If my observation is right, the real split mode is using the secondary
> VFO of your XCVR, sometimes set to a different frequency as the main
> VFO, as the VFO of the TX phase. In contrast, in fake split mode, only
> the main VFO is used and its frequency is changed sometimes during the
> TX phase. The goal is always to maintain the audio frequency, during the
> TX phase, in the 1500 to 2000 Hz range. You can only use the real split
> mode if your rig has a secondary VFO and if it's capable of switching
> the VFO's using CAT commands.
>
> Please correct me if I'm wrong.
>
> Best wishes,
> Claude (DJ0OT)
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
