If you are working above 2000, and might have performance issues on receiving signals there, another option is to use a higher dial frequency -- eg 7.075 or 7.076. This doesn't affect the actual frequencies used, just may make it easier to manage.
On Tue, Nov 20, 2018 at 7:52 AM John Nelson <j...@rmnjmn.co.uk> wrote: > Steve, > > > one must “adjust” the AF “Power” drive control as one shifts Tx > frequency. > > Are you not using CAT control with “Split” selected? If so, VFOB is set > such that the audio tone generated is always between 1500 and 2000 Hz which > should always be within the SSB passband. The TX offset is managed by > VFOB. > > — John G4KLA_______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
