On 29 Nov 2018 at 16:06, Joe Taylor wrote:

> Hi Martin,
> 
> Thanks for your report.  This bug was identified and fixed several days 
> ago.  It will not be present in the GA release.
> 
> The workaround in the RC5 release is simple.  Switch to JT9+JT65 mode, 
> toggle the button above "Hold Tx Freq" to show "Tx JT65 #", then return 
> to JT65 mode.
> 
>       -- 73, Joe, K1JT

Hi Joe, many thanks.  Glad to hear the bug has already been fixed.

I'm looking forward to the GA release after which there'll (hopefully!) be more 
stations than at 
present using 77-bit FT8!

On a largely unrelated topic, here's a few suggestions for incorporation into 
the GUI at some 
point in time (not necessarily for the upcoming GA release)...

1.  It would be useful to be able to bring up the 'Configurations' menu without 
having to 
    enable all the menu options by ticking the 'Menus' box.  It would make 
switching 
    between different configurations slightly easier and quicker.

2.  It would be useful to have a keyboard shortcut, for example Alt-A, for 
adding a DX 
    call and their grid to the database.  There's already a shortcut (Ctrl-L) 
for looking up a 
    callsign, so why not have one for adding a callsign?

3.  When operating in DXpedition 'Hound' mode, it might be helpful if the 
frequency scale 
    across the top of the Wide Graph windows was colour-coded red below 1000Hz 
and 
    green above 1000Hz.  It might make it a bit more obvious to users that they 
shouldn't 
    be calling the Fox below 1000Hz.

My thanks go to you, Bill and everyone else in the development team for all 
your hard work 
and dedication to evolving and improving the software - your efforts have 
transformed 
operating for many, many amateurs around the world.

--
73, Martin G0HDB


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to