On 12/12/2018 17:45, OG55W wrote:
I have tried to find how to operate with split..
JA-stations are calling me in 1908 as I am transmitting in 1840, and I
do not hear them as my RX or TX change the frequency.
I am not allowed to transmit in 1908.
Hi Keijo,
WSJT-X does not support this using CAT control, it conflicts with the
way that WSJT-X uses CAT control to clean up Tx signals and extend Tx
coverage to at least the Rx pass band.
You can do what you wish by creating a new configuration
("Menu->Configurations") and in that new configuration turn off CAT
control ("Settings->Radio->RIg" as "None"). You can then use SPLIT on
your rig just like you would for a CW or phone QSO. Don't forget to set
WSJT-X to the correct band so that QSOs get logged on the correct band
and PSKReporter spots are accurate. I recommend setting WSJT-X to the Tx
dial frequency so that spots are in the JA band segment where the DX is
transmitting.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
