Furthermore, why would this effect it only when using Omni-rig for the interface.
Sorry, I guess I implied before... It works ok if you set the rig direct in WSJT. Unfortunately we have to use Omni-Rig in order to get WSJT and N1MM to play together on the CAT control. On Wed, Dec 19, 2018 at 1:11 PM Mike Maynard <m...@k2gc.net> wrote: > Bill, that is something I am not sure about, we were working over the > phone. > > It only happened on UHF though. Wouldnt the calibration fields effect all > frequencies? (although, I guess if they were skewed just right....) > > Mike > > On Wed, Dec 19, 2018 at 12:53 PM Bill Somerville <g4...@classdesign.com> > wrote: > >> On 19/12/2018 17:23, Mike Maynard wrote: >> >> Working with a friend of mine today to try and set his WSJT and N1MM (and >> both have cat control together) we discovered an anomaly . >> >> When using Omni-Rig inside WSJT for cat control, when you choose UHF as >> your band (frequency - 432.500), upon initial selection it adds 10hz to the >> frequency automatically. It additionally will add 10hz after release of >> the TX on any subsequent TX cycle, including using the Tune button. >> >> This happening with a Yaesu FT-847. >> >> Has anyone else seen such a thing? >> >> -- >> Mike >> K2GC >> www.k2gc.net >> >> Hi Mike, >> >> I believe the frequency resolution of the FT-847 is 10 Hz so this is a >> single step error. Do you have the "Settings->Frequencies->Frequency >> Calibration" fields zeroed? >> >> 73 >> Bill >> G4WJS. >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > > > -- > Mike > K2GC > www.k2gc.net > -- Mike K2GC www.k2gc.net
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
