I'll mention that I'm working on a new program for hamlib I'm calling rigctlp
that will allow a virtual COM port passthru as a TS-2000 emulator.That way any
program (e.g. N1MM) can set up a TS-2000 on a virtual COM port...which in turn
can talk to FLRig for example which can handle multiple programs accessing it
at once.
I hope to have it finished by the new year.
de Mike W9MDB
On Wednesday, December 19, 2018, 6:12:30 PM CST, Bill Somerville
<[email protected]> wrote:
On 19/12/2018 21:06, Mike Maynard wrote:
> Omni-rig is only running via WSJT. Both are shared against a serial
> port splitter via VSPE.
>
> There is something about how WSJT handles the control directly, that
> it wont work (hangs up N1MM when set that way) but when you use
> omni-rig on the WSJT side things work ok.
>
> Mike
Hi Mike,
we do not support using dumb serial port splitters anywhere in the CAT
control chain since they do not handle conflicts or collisions in any way.
As far as I know the only way to run N1MM Logger+ and WSJT-X at the same
time is to disable CAT control in one of them. WSJT-X supports several
rig control server options but N1MM supports none of them.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
