Problem solved. I looked over the information on the waterfall wide graph window and noticed that the "FLATTEN" button was open while the "RF SPEC" was checked. Somehow, I must have unchecked the FLATTEN button while switching to JTAlert-X to catch a CQ station. Once I checked FLATTEN, signals appeared on the waterfall. RF SPEC seems to be a yet-to-be-implemented function so everything is blank if it is selected. Recommend it be GRAYED OUT to avoid mistakes.
At least all drivers are up-to-date, K3 software is still current, and soundcard is healthy. 73 es tnx for all the suggestions. de Ed On Fri, May 10, 2019 at 12:31 AM Edfel Rivera <edfelj...@gmail.com> wrote: > Hi: > Maybe a corrupt driver. If you installed or used another application. I > had problems with my Kenwood 590SG not sure if it was Winlink or a Windows > update. Maybe reinstall drivers (depending on rig). Plug unplug USB > cable. > > Just my 2 cents. > > 73' > > Edfel > KP4AJ > > On Thu, May 9, 2019 at 8:22 PM Hasan al-Basri <hbasri.schie...@gmail.com> > wrote: > >> I've had the new 64 bit version go deaf in a similar manner after sitting >> unused perhaps 36 hours. Nothing would solve it...rebooted, fixed it >> immediately with no changes of any kind. >> 73, N0AN >> Hasan >> >> >> On Thu, May 9, 2019 at 7:02 PM Ed Deichler <k2te....@gmail.com> wrote: >> >>> Both LINE IN and LINE OUT were previously set to mono and the program >>> worked fine. Changing to RIGHT channel made no difference in the decoding, >>> i.e. still a blank waterfall. I'm not sure whether the soundcard is dead >>> or the K3 output is dead. >>> >>> Ed >>> >>> On Thu, May 9, 2019 at 4:52 PM Bill Somerville <g4...@classdesign.com> >>> wrote: >>> >>>> On 09/05/2019 16:57, Ed Deichler wrote: >>>> > Bill, >>>> > >>>> > Yes. The K3 has respective jacks for line in and line out. >>>> According >>>> > to the manual, the K3 has two settings for the audio output. NORMAL >>>> > is usually used for digital modes and a separate PHONES setting >>>> allows >>>> > the audio to match headphones and be controlled by the AF/SUB gain >>>> > controls. Either choice makes no difference. >>>> > >>>> > 73 de Ed >>>> >>>> Hi Ed, >>>> >>>> the NOR option also has a level, default is 10. Also make sure you have >>>> the right stereo channel (i.e. left for MAIN Rx) selected in the WSJT-X >>>> "Settings->Audio" panel. >>>> >>>> 73 >>>> Bill >>>> G4WJS. >>>> >>>> >>>> >>>> _______________________________________________ >>>> wsjt-devel mailing list >>>> wsjt-devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
