I've had the new 64 bit version go deaf in a similar manner after sitting unused perhaps 36 hours. Nothing would solve it...rebooted, fixed it immediately with no changes of any kind. 73, N0AN Hasan
On Thu, May 9, 2019 at 7:02 PM Ed Deichler <k2te....@gmail.com> wrote: > Both LINE IN and LINE OUT were previously set to mono and the program > worked fine. Changing to RIGHT channel made no difference in the decoding, > i.e. still a blank waterfall. I'm not sure whether the soundcard is dead > or the K3 output is dead. > > Ed > > On Thu, May 9, 2019 at 4:52 PM Bill Somerville <g4...@classdesign.com> > wrote: > >> On 09/05/2019 16:57, Ed Deichler wrote: >> > Bill, >> > >> > Yes. The K3 has respective jacks for line in and line out. According >> > to the manual, the K3 has two settings for the audio output. NORMAL >> > is usually used for digital modes and a separate PHONES setting allows >> > the audio to match headphones and be controlled by the AF/SUB gain >> > controls. Either choice makes no difference. >> > >> > 73 de Ed >> >> Hi Ed, >> >> the NOR option also has a level, default is 10. Also make sure you have >> the right stereo channel (i.e. left for MAIN Rx) selected in the WSJT-X >> "Settings->Audio" panel. >> >> 73 >> Bill >> G4WJS. >> >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
