Ed,

you have now referred twice to the sound card speaker, that has nothing to do with Rx. How is your K3 connected to your sound card for PC for Rx audio? Do you have the correct audio input device selected in WSJT-X? Is that device un-muted in the sound mixer?

73
Bill
G4WJS.

On 09/05/2019 14:33, Ed Deichler wrote:
I'm using GA V2.0.1; I erred on the version in my original post.  The Time.is app shows my timing is 0.007 seconds off so accuracy is not the problem.  My soundcard speaker is a Microsoft high-definition audio device that tests out as working fine.

In my haste I forgot to mention that the waterfall shows nothing at all.  It is completely blank, no evident of noise let alone received signal traces.  I do observe signals on my panadapter so the K3 is working fine on receive.  I use the data/pkt mode under the Radio tab of the Configuration menu.

73 de Ed

On Thu, May 9, 2019 at 12:31 PM Bill Somerville <g4...@classdesign.com <mailto:g4...@classdesign.com>> wrote:

    On 09/05/2019 13:01, Ed Deichler wrote:
    > I fired up WSJT-X last night only to have decoding suddenly stop
    after
    > a few minutes.  I was using the rc5 release at the time but a
    switch
    > to V2.0.0 GA showed the same results.  I checked my soundcard
    speaker
    > functions and they test out normal.  Several reboots of the
    computer
    > did not help.  Changing bands made no difference, which I did
    not expect.
    >
    > Computer: Gateway Dell Core2 Duo running Windows 7 (yeah, it's old).
    >
    > Do I delete the WSJT-X programs and reload them or will
    everything go
    > haywire?
    >
    > Thanks,
    >
    > Ed, K2TE

    Hi Ed,

    you don't mention checking your PC's time sync with UTC. Go here to
    check: https://time.is . If it is not showing "exact!" or within
    ±0.5 S
    then you need to do something to sort it out. See the WSJT-X User
    Guide
    for some suggestions:
    
https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.0.1.html#INSTALL_WIN

    . If you have already installed a suitable time sync application;
    then
    check that it is enabled and working correctly.

    73
    Bill
    G4WJS.


_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to