Bill, Yes. The K3 has respective jacks for line in and line out. According to the manual, the K3 has two settings for the audio output. NORMAL is usually used for digital modes and a separate PHONES setting allows the audio to match headphones and be controlled by the AF/SUB gain controls. Either choice makes no difference.
73 de Ed On Thu, May 9, 2019 at 2:14 PM Bill Somerville <g4...@classdesign.com> wrote: > On 09/05/2019 14:52, Ed Deichler wrote: > > Bill, > > > > Connection to the K3 is speaker out of computer to line in of the K3. > > Disconnecting the cable at the computer stops the waterfall > > scrolling. Reconnecting to the computer then restarting the program > > restores the scrolling but nothing shows on the waterfall. > > > > As I stated in the initial post, everything was working fine last > > night for a few minutes then the waterfall went blank. > > > > 73 de Ed > > Hi Ed, > > ok, so that means your Rx audio is not going to the PC, check your K3 > audio o/p settings. Doesn't the K3 have a fixed level line out socket on > the back, or do you have to fit an option to get that? > > 73 > Bill > G4WJS. > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
