It sounds like you do have Split set in the WSJT-X rig control, right?But it
sounds like you were transmitting on VFOA...which would have been 500Hz lower.
So what does your Flex tell you?
This has nothing to do with Fox/Hound.
de Mike W9MDB
On Tuesday, November 5, 2019, 09:53:37 AM CST, Edward stallman
<ed.n...@gmail.com> wrote:
I posted this on the Flex Community but wanted to ask here too
Question while using FT8 F/H , I'm using the Flex 6600 with Slicemaster to
execute WSJT. This morning while calling T6AA my dial freq on the flex was
7.070.00 F/H . I go into the WSJT settings and tick Hound plus check the square
box, then under Radio I check Rig and OK . I get the red flag stating I"m in
Hound mode . I'm copying T6AA at 495 Hz , I set the red TX at 2002 Hz ... Now
when I transmit I see the WSJT freq shift from 7.070.000 to 7.070.500 ... All
this looks as it should up to this point !
Here's the part I don't understand . I stopped transmitting long enuf to be
sure I'm on a clear freq , What I see big signal on my TX freq 2002 HZ . The op
was a friend of mine who was on the ON4KST low band chat . I tell him we are
both transmitting on 2002 HZ . My friend and others all agree that I'm not on
2002 Hz , that they decode me at 1502 HZ . I move my Red TX to 2502 Hz and ask
the group where they decode me now ? They all agree I'm still on 1502 HZ .
If this is the way it's supposed to work , I fine this strange ? to be sure
I'm TXing on a clear freq I have to subtract 500 or 1000 Hz from where I place
my Red goalie ... Or is something setup wrong somewhere ?
Thanks Ed N5DG
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
