Hi Folks, Does the "Allow Tx Frequency Changes While Transmitting" (File/Settings/General Tab) when not-checked function as intended?
My expectation would be that if disabled that any frequency changes observed in the Tx spin-box widget on the Main Window should be delayed until the end of the cycle and should not be immediate (or perhaps these boxes disabled until the end of the cycle) under this circumstance. I just performed a slight frequency change on 20m while transmitting and noted that in the "Rx Frequency Window" that a frequency change during the Tx cycle from 851 to 899 to 900 Hz was noted. 035400 Tx 851 ~ CQ VK3VM QF11 035405 Tx 851 ~ CQ VK3VM QF11 035408 Tx 851 ~ CQ VK3VM QF11 035410 Tx 899 ~ CQ VK3VM QF11 035430 Tx 900 ~ CQ VK3VM QF11 035500 Tx 900 ~ CQ VK3VM QF11 I have also observed some frequency shifts on waterfalls that may or may not be related to this. I cannot recall any inquiry on this so far and if I have missed it my apologies. 73 Steve I VK3VM / VK3SIR _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
