Ps: The JPEG's supplied show changes in Tx frequency when the "Tx spinner-box" widget has its "up" control selected while transmitting !
-----Original Message----- From: Stephen VK3SIR <vk3...@hotmail.com> Sent: Thursday, 21 May 2020 7:24 AM To: WSJT software development <wsjt-devel@lists.sourceforge.net> Subject: Re: [wsjt-devel] 2.2.0 rc1 - Allow Tx Frequency Changes While Transmitting Joe and the Core Development Team, Test environ: The Main FT-991 connected to a 80m Doublet (v2.2 rc1); Second environ is a FT-897D with SCU-17 into a dummy load (v2.1.2). Test band is 20m. I can confirm as that on FT8 transmissions that frequency changes on Tx are blocked. But... Yet the Tx function may not be blocked on all modes and universally. - The spinner control does permit frequency changes while Tune is selected (minor). See attached Tune.jpg - Of considerable concern is that frequency changes are permitted on JT65. See attached JT65.jpg. No further modes are tested due to time constraints. As suggested, perhaps the and simplest way to implement a common fix across all modes for the future enhancement may be to disable input to the control during any Tx cycles? 73 Steve I VK3VM / VK3SIR _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
