Hi Jim, you should consider using different configurations for the modes and try to not use the MODE selector when possible, using a Configuration for each mode will return you to exactly where you were before on that mode. I use it exclusively on the three computers here (2 are PI's) and find it works a treat. It is just a small mind set change for changing modes to use the Configuration menu, start with one sample setup like you use for FT8 and Clone it, rename the clone to be MSK144, switch to that mode and alter the settings to how you like it, even the waterfall changes are remembered. You may be pleasantly surprised how well it works for you.
Regards, Peter, vk5pj On Tue, May 19, 2020 at 2:54 PM Jim Brown <k...@audiosystemsgroup.com> wrote: > Joe, Bill, and Steve, > > I have made this "feature request before, and hoped to see it in this > beta, but it's missing. My request is that either 1) WSJT-X remember my > setting of Hold TX Frequency or 2) make Hold TX Frequency the default. I > am continually bitten by this when I switch back and forth between the > slow modes and fast modes on 6M. I ALWAYS want it ON, but when I return > to FT8 from MSK144 or ISCAT, it's ALWAYS turned off and set to 1500 Hz. > > I'm THRILLED with the three-stage decode process. It speeds up general > operation a lot, because I now nearly always have time to make TX > decisions in time to start at the beginning of the TX period. > > I'm experiencing at least as many bad decodes as before, maybe more, and > they seem to come from that last third decode operation. Not > complaining, just observing. > > Thanks and 73, Jim K9YC > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
