Hi Jim,
On 5/19/2020 01:20, Jim Brown K9YC wrote:
I have made this "feature request before, and hoped to see it in this
beta, but it's missing. My request is that either 1) WSJT-X remember my
setting of Hold TX Frequency or 2) make Hold TX Frequency the default. I
am continually bitten by this when I switch back and forth between the
slow modes and fast modes on 6M. I ALWAYS want it ON, but when I return
to FT8 from MSK144 or ISCAT, it's ALWAYS turned off and set to 1500 Hz.
I operate on 6m a lot, using FT8, MSK144, and recently also FT4. I
never have the problem you describe.
Is there a reason why you choose not to set up and use a different
Configuration for each mode? Configurations save all your settings.
Switching modes from the Mode menu necessarily sets some parameters to
the default for that mode.
I'm THRILLED with the three-stage decode process. It speeds up general
operation a lot, because I now nearly always have time to make TX
decisions in time to start at the beginning of the TX period.
I'm experiencing at least as many bad decodes as before, maybe more, and
they seem to come from that last third decode operation. Not
complaining, just observing.
You will soon find that RC2, the second release candidate for v2.2.0,
produces far fewer false decodes than RC1.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
