Hi, thanks - interesting and useful, but could I suggest putting those
words in the User Guide, together with an brief explanation of the
various decoder modes? (Sorry if already there but on a quick look I
haven't been able to find them)
The list of AP information types is a bit long to remember unless one
sees them everyday, so would it be possible to have a tooltip on those
when they are displayed, and/or maybe a marker on the UI to remind the
user that AP has been set perhaps with an explanatory tooltip on that if
it's not practical to put them on the decode list?
Alan G0TLK
On 26/05/2020 22:17, Joe Taylor wrote:
Hi all,
No need to send any more .wav files that produce false decodes.
In future:
- If you don't like false decodes set your Decode option to Fast or
Normal.
- If you want the very best decoding performance and are happy
rejecting the small number of easily recognizable false decodes that
you may see, set Decode to Deep and use AP.
Some Guiding Principles for our decoding algorithms:
- Decodable messages should always look the same to all users,
regardless of any settings of "Special operating activities."
- If you aren’t seeing occasional false decodes, you aren’t trying hard
enough.
-- 73, Joe, K1JT
On 5/26/2020 4:53 PM, Stephen VK3SIR wrote:
HiFolks,
There seems to be some strong evidence mounting regarding
non-standard suffix usage – in particular /R …
Remember that we should be using Save/Save Decoded so that these can
be emailed on request to The Core Development Team when discovered !
73
Steve I
VK3VM/VK3SIR
*From:*Allan VK4QG <[email protected]>
*Sent:* Tuesday, 26 May 2020 4:05 PM
*To:* [email protected]
*Subject:* [wsjt-devel] WSJT-X 2.2.0 rc2
Gentlemen,
To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM, W10
pro 64bit. I do not use CAT but instead use RTS on COM1 for
opto-isolated PTT and XFR isolation for audio in and out of the
sound-card, and have done so without issue since 2006.
Two problems : -
1. I have found with rc2 that occasionally PTT is not working at
all and when it does there is often no TX audio present either. While
monitoring 'Radio' under 'Settings' I have noticed when this occurs,
after a successful transmission about two seconds into the _RX_
period the 'Test PTT' button turns red and from that point there is
no PTT in the following TX period. After a time it appears to clear
itself and PTT in the following period with or without TX audio.
2. I am still getting numerous false decodes. Most of these
contain '/R' and '<.....>'. I am not using AP.
Many thanks,
Allan - VK4QG
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
