HiFolks, There seems to be some strong evidence mounting regarding non-standard suffix usage – in particular /R …
Remember that we should be using Save/Save Decoded so that these can be emailed on request to The Core Development Team when discovered ! 73 Steve I VK3VM/VK3SIR From: Allan VK4QG <[email protected]> Sent: Tuesday, 26 May 2020 4:05 PM To: [email protected] Subject: [wsjt-devel] WSJT-X 2.2.0 rc2 Gentlemen, To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM, W10 pro 64bit. I do not use CAT but instead use RTS on COM1 for opto-isolated PTT and XFR isolation for audio in and out of the sound-card, and have done so without issue since 2006. Two problems : - 1. I have found with rc2 that occasionally PTT is not working at all and when it does there is often no TX audio present either. While monitoring 'Radio' under 'Settings' I have noticed when this occurs, after a successful transmission about two seconds into the RX period the 'Test PTT' button turns red and from that point there is no PTT in the following TX period. After a time it appears to clear itself and PTT in the following period with or without TX audio. 2. I am still getting numerous false decodes. Most of these contain '/R' and '<.....>'. I am not using AP. Many thanks, Allan - VK4QG
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
